This post is an explanation of installing the cutter & probe steps for the 2M2 Magic Tank car key cutting machine.
How to install cutter & probe for 2M2 Magic Tank?
Open Magic Tank app, enter into settings >> probe l cutter >> replace the cutter/probe;
Operate according to the illustration:
1. Rotate the handwheel to move the middle clamp to the left.
2. Let the middle clamp completely against the left clamp.
3. Using tools to loosen fasteners of cutter & probe.
4. Insert the cutter & probe to the top, fixing them.
5. Loosen the fixing screw of the probe, pull the probe down until it touches the clamp platform. Then tighten the screw.
The operation is completed!
More operation tips about 2M2 Magic Tank to be updated…
https://www.obd2shop.co.uk/