What’s up, guys? Today I’m going to show how to reset adaptation values for your variable camshaft timing control on an R56 Mini Cooper S. So if you’ve just done your timing chain recently, you will need to read this tutorial. I’m gonna do this job with a Foxwell NT510 Elite OBD2 scan tool.
First you have to do, it is to put your key in the ignition, and press the start button without hitting the brake or the clutch.
Plug the Foxwell NT510 Elite to OBD2 port underneath the dash, and start:
BMW >> Mini >> SmartVIN >> Press F3 to be completed >> Press F3 for “Yes”
Please wait loading data until 100%…
Service >> Drive >> Motor Electronics >> Adjustment >> Clear Adaptations
DME: delete adaptation variable camshaft timing control >> Read the notes, press F3 for “OK”>> Reset adaptation values >> Read the notes, press F3 for “OK”
The adaptation values have been successfully reset, press F3.
Switch off terminal 15 and terminal R. Wait 15 seconds until the reset adaptation values are stored in the DME. Press F3 and wait…
Switch on terminal 15. Leave ignition switched on for at least 10 seconds. Press F3 to complete.
Job has done.
Foxwell NT510 Elite should work this function on any BMW Mini Cooper except for a classic mini cooper.
https://www.obd2shop.co.uk/